Zoom Trong Word / Top 16 Xem Nhiều Nhất & Mới Nhất 10/2023 # Top Trend

Zoom in or out with Word 2007

There are several ways Word 2007 lets you zoom in or zoom out on documents: the first way to zoom in or out is to use the zoom slider located in the bottom right corner of Microsoft Word’s main window: by default, your documents are zoomed at 100% – in other words, the document is shown in real size, without any actual zoom.

Zoom in/out or reset the zoom from using the Word 2007 ribbon Named zoom factors in Word 2007

Word 2007 also includes “named zoom factors” in the Zoom dialog: namely, these are Page width (which will zoom the document to make it fit the entire width of the Word window); Text width (which will automatically zoom in (or out) until the left and right text boundaries are lined up with the border of your Word 2007 window); and finally Whole page, which will zoom out of the document until the entire height of the current page is visible inside your Word 2007 window:

Note that the following named zoom factors are also available directly from the ribbon: One Page (zoom out to show the entire page in all its height), Two Pages (show the same zoom factor as One Page, but show two pages side by side), and Page Width (zoom in to make your document page as wide as permitted by the size of the Word 2007 window). Named zooms in Word 2007 are just shortcuts to various zoom levels, and you can still access them manually, using any one of the zooming methods we outline in this tutorial.

Using the mouse to zoom in Word 2007

Here is a quick tip to close this Word 2007 tutorial on zooming: to zoom in or out fast, hold down the control key on your keyboard ( Ctrl), and scroll the wheel of your mouse. To zoom in, scroll up with the mouse wheel, while holding the Ctrl key pressed down; to zoom out of your document, follow the same steps, and move your mouse wheel down, as if you were scrolling down, still with the Ctrl key held down!

Since each of the mouse “thumps” corresponds to an increment (or decrement) of 10%, Ctrl-scroll 9 times down to zoom out to the minimum of 10% (shown on the screenshot above), and ctrl-scroll back up 9 times to reset the zoom. Since Word 2007 lets you zoom in up to 500% of the original document size, this means that you can view your document, with maximum zoom on, 50-times larger than it actually is. (If you want to zoom that much into the document, using the status bar slider we mentioned earlier would be easier than scrolling up while holding down the control key.)

Computer monitors vary a lot in resolution, and the strength of an individual’s eyesight can lead them to want larger text on their screen. This is especially true when you are reading on your computer screen, such as when you are viewing or editing a document in Word 2010. So if you are finding that the text size is too small for comfortable reading, or if you want to zoom way back and see how your document page looks in its’ entirety, then you can follow the tutorial below to zoom in or out in Word 2010.

A Roku from Amazon is a terrific gift for anyone that likes to watch movies or TV shows and is looking for an easy and affordable way to do so.

Zoom In or Out on a Document in Word 2010

You can always return to the default 100% zoom level by pressing the 100% button in the Zoom section of the ribbon that we will be navigating to below. This can save you some time as you try and return to normal after zooming in or out on your document.

Step 1: Open Word 2010.

Use this portable external hard drive from Amazon as an inexpensive backup solution so that you have an extra copy of your important in files in the case of a theft or data loss.

We previously covered how to zoom in Print Preview in Word 2010.

Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.

After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.

His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.

Share this:

Facebook

Twitter

LinkedIn

Pinterest

Reddit

Related

Disclaimer: Most of the pages on the internet include affiliate links, including some on this site.

Thế giới thủ thuật – Powerpoint chắc chắc là một công cụ không thể thiếu cho các thầy cô, diễn giả, nhân viên văn phòng… Tuy nhiên để có được một Slide đẹp, khoa học ngoài việc trang trí slide bằng các hiệu ứng thì chúng ta cần sử dụng một cách linh hoạt các tính năng trong Powerpoint. Một trong những tính năng giúp bạn thiết kế một slide chuyên nghiệp đó chính là hiệu ứng Zoom trong Powerpoint

Khi bạn tạo hiệu ứng zoom trong PowerPoint, bạn có thể chuyển đến và từ các trang chiếu cụ thể, các phần và phần của bản trình bày theo thứ tự bạn quyết định trong khi bạn đang trình bày.

Tuy nhiên hiệu ứng này chỉ dùng được trên Office 365 và Office 2023

Sử dụng Summary Zoom

Summary zoom giống như một trang đích mà bạn có thể nhìn thấy các phần của slide trình bày cùng một lúc. Khi bạn đang trình bày, bạn có thể sử dụng hiệu ứng zoom trong Powerpoint để chuyển từ vị trí này trong slide của mình sang một nơi nào đó trong bất kỳ thứ tự nào mà bạn muốn.

Chọn Summary Zoom

Hộp thoại Summary Zoom sẽ mở ra. Chọn các Slide mà bạn muốn đưa vào hiệu ứng Summary zoom. Những bản chiếu này trở thành các trang chiếu đầu tiên của các phần trình chiếu tóm tắt của bạn.

Bấm chọn các Slide mà bạn muốn đưa vào hiệu ứng Summary zoom. Sau đó bấm chọn Insert.

Hiệu ứng Summary zoom sẽ tạo ra cho bạn 1 slide mới được chèn vào ngay trước slide đầu tiên mà bạn chọn trong hiệu ứng summary zoom

Slide Zoom

Slide zoom có thể giúp bạn làm cho bản trình bày của mình thêm năng động, cho phép bạn dẫn hướng một cách tự do giữa các Slide theo bất kỳ thứ tự nào mà bạn chọn nhưng không làm gián đoạn bản trình bày của bạn. Slide zoom là một lựa chọn tốt cho bản trình bày ngắn và không có nhiều sections, nhưng bạn có thể sử dụng slide zoom cho nhiều tình huống bản trình bày khác nhau.

Slide zoom giúp bạn đi sâu vào phần thông tin trong trong Slide

Chọn Slide zoom

Hộp thoại slide zoom sẽ mở ra. Chọn các slide mà bạn muốn sử dụng trong hiệu ứng slide zoom

Sau khi bạn đã chọn tất cả các slide bạn muốn sử dụng, hãy chọn Insert. Hiệu ứng slide zoom sẽ được tạo ra.

Section zoom

Section zoom là một dạng nối kết đến một phần đã có trong bản trình bày của bạn. Bạn có thể sử dụng chúng để quay lại các phần mà bạn muốn thực sự nhấn mạnh, hoặc để hightlight một số phần trong bài trình bày.

Chọn Section zoom

Hộp thoại section zoom sẽ mở ra. Chọn các section mà bạn muốn sử dụng hiệu ứng.

Bấm Insert để thực hiện.

Billy Nguyễn

Where is the Zoom in Microsoft Word 2007, 2010, 2013, 2023, 2023 and 365

If you do not want to waste too much time on learning the Ribbon of Word 2007/2010/2013/2023/2023 after upgrading to Word 2007, 2010 or 2013, you should try Classic Menu for Office. Classic Menu for Office will make Word 2007/2010/2013/2023/2023 look like Word 2003/XP(2002)/2000.

Method A: Zoom feature in old View menu with Classic Menu

You will find the Zoom feature In the View drop down menu under Menus tab, just as the same procedure as you did in Word 2003/XP(2002)/2000. There are five options in the Zoom item’s sub-list: Zoom, 100%, One Page, Two Page, and Page Width. See screen shot (Figure 1):

Figure 1: Zoom feature in Classic Menu

Method B: Zoom button in old Toolbars with Classic Menu

Find out the Zoom button in the same old Toolbars of Classic Menu. In the drop down list of Zoom button, there are also five options as we described in Method A. See screen shot (Figure 2):

Figure 2: Zoom button in toolbars of Classic Menu

Method C: Zoom button in Ribbon

If there is no Classic Menu for Office, the following steps will guild you through accessing the Zoom commands:

Go to Zoom group;

Then you will find out five zoom buttons: Zoom button, 100% button, One Page button, Two Page button, and Page Width button. See screen shot (Figure 3):

Figure 3: Zoom buttons in Ribbon

Method D: Zoom feature in status bar

The easiest method is that you can directly access the Zoom feature in Word status bar of 2007/2010/2013. See screen shot (Figure 3). It is quite easy to zoom in or zoom out your documents by moving the slider.

More Related Articles What is Classic Menu for Office

The software Classic Menu for Office is designed for the people who are accustomed to the old interface of Microsoft Office 2003, XP (2002) and 2000. It brings back the classic menus and toolbars to Microsoft Office (includes Word) 2007, 2010, 2013, 2023, 2023 and 365. The classic view helps the people to smoothly upgrade to the latest version of Office, and work with Office 2007/2010/2013/2023 as if it were Office 2003 (and 2002, 2000).

Screen Shot of Classic Menu for Word

All new features and commands of Office 2007, 2010, 2013, 2023, 2023 and 365 have been added to the menus and toolbars;

Without any training or tutorials after upgrading, users can work with Office 2007/2010/2013/2023 immediately;

Easy to find any command items you want to process;

Easy to show or hide the classic menus, toolbars and ribbon tabs;

Easy to install and use. Supports all languages. Free download!

The zoom feature in Excel changes the scale of a worksheet. When you want to see more or less of a worksheet, use Zoom to increase or decrease the magnification.

The information in this article applies to Excel 2023, Excel 2023, Excel 2013, Excel 2010, and Excel 2007.

Choose Your Zoom Method

There are three different ways to zoom in on a worksheet:

The Zoom slider located on the status bar.

The Zoom tool found on the View tab of the Excel ribbon.

The Zoom on roll with IntelliMouse option.

Use the Zoom Slider

When you want to quickly change the magnification of a worksheet, use the Zoom slider. You’ll find the Zoom slider in the bottom right corner of the Excel window. To use the Zoom slider, drag the slider to the right or to the left.

To zoom in, drag the slider to the right. Everything on the worksheet gets larger and you see less of the worksheet.

To zoom out, drag the slider to the left. Objects in the worksheet get smaller and you see more of the worksheet.

An alternative to using the slider is to select Zoom Out or Zoom In located at either end of the slider. The buttons zoom the worksheet in or out in increments of 10%.

Adjusting the zoom level does not affect the actual size of a worksheet. Printouts of the current sheet remain the same, regardless of the selected zoom level.

Set a Custom Zoom Magnification

Select Zoom to open the Zoom dialog box. The Zoom dialog box contains pre-set magnification options ranging from 25% to 200%, as well as choices for custom magnification and zooming to fit the current selection.

Zoom With Shortcut Keys

Keyboard key combinations that zoom in and out of a worksheet involve using the ALT key. These shortcuts access the zoom options on the View tab of the ribbon using keyboard keys rather than the mouse.

Here are the zoom shortcut keys:

ALT+W+J: Activates the 100% zoom option on the ribbon.

ALT+W+G: Activates Zoom to Selection on the ribbon.

ALT+V+Z: Opens the Zoom dialog box.

ALT+W+Q: Opens the Zoom dialog box.

When you’re working in the Zoom dialog box, press one of the following keyboard shortcuts to change the magnification level:

0+Enter: 200% zoom

1+Enter: 100% zoom

7+Enter: 75% zoom

5+Enter: 50% zoom

2+Enter: 25% zoom

Using these keyboard keys to activate the Custom zoom option requires additional keystrokes in addition to those needed to open the Zoom dialog box.

After typing ALT+W+Q+C, enter numbers such as 33 for a 33% magnification level. Complete the sequence by pressing Enter.

Zoom on Roll With IntelliMouse

If you frequently adjust the zoom level of worksheets, you might want to use the Zoom on roll with IntelliMouse option.

When activated, this option allows you to zoom in or out using the scroll wheel. The option is activated using the Excel Options dialog box.

Select File.

Select Options to open the Excel Options dialog box.

Select Advanced in the left-hand panel of the dialog box.

Select Zoom on roll with IntelliMouse in the right panel to activate this option.

Zoom out to Display Named Ranges

If a worksheet contains one or more named ranges, zoom levels below 40% display these named ranges surrounded by a border. This provides a quick and easy way to check their location in a worksheet.