Xu Hướng 2/2023 # Formatting Paragraphs In Microsoft Word # Top 6 View | Hoisinhvienqnam.edu.vn

Xu Hướng 2/2023 # Formatting Paragraphs In Microsoft Word # Top 6 View

Bạn đang xem bài viết Formatting Paragraphs In Microsoft Word được cập nhật mới nhất trên website Hoisinhvienqnam.edu.vn. Hy vọng những thông tin mà chúng tôi đã chia sẻ là hữu ích với bạn. Nếu nội dung hay, ý nghĩa bạn hãy chia sẻ với bạn bè của mình và luôn theo dõi, ủng hộ chúng tôi để cập nhật những thông tin mới nhất.

Microsoft Word: Formatting Paragraphs

A paragraph in Word is any text that ends with a hard return. You insert a hard return anytime you press the Enter key. Paragraph formatting lets you control the appearance if individual paragraphs. For example, you can change the alignment of text from left to center or the spacing between lines form single to double. You can indent paragraphs, number them, or add borders and shading to them.

Paragraph formatting is applied to an entire paragraph. All formatting for a paragraph is stored in the paragraph mark and carried to the next paragraph when you press the Enter key. You can copy paragraph formats from paragraph to paragraph and view formats through task panes.

Paragraph Alignment

Paragraph alignment determines how the lines in a paragraph appear in relation to the left and right margins. The margin is the blank space between the edge of the paper and where the text.

The easiest way to change paragraph alignment is to use the alignment buttons on the Formatting toolbar.

You can also use keyboard shortcuts. Ctrl+L= Left Align; Ctrl+R= Right Align; Ctrl+E= Center; Ctrl+J= Justify.

Line and Paragraph Spacing

Line space is the amount of vertical space between lines of text in a paragraph. Line spacing is typically based on the height of the characters, but you can change it to a specific value. For example, some paragraphs may be single spaced and some double-spaced. Single-spacing is Word’s default setting.

Paragraph space is the amount of space above or below a paragraph. Instead of pressing Enter multiple times to increase space between paragraphs, you can set a specific amount of space before or after paragraphs.

With the dialog box still open, select

Single

from the line spacing drop down menu. Notice the change in the preview pane.

Choose

Multiple

from the

Line Spacing

drop-down list. In the

At

box, key 1.25 (highlight the text in the box and type over it). Press

Tab

to see the change in the preview pane.

Exercise:

Changing Paragraph Spacing

You use the Paragraph dialog box to set the space between paragraphs. Paragraph spacing is set in points. If a document has 12-point text, then one line space equals 12-points, one-half line space equals 6-points, double-spacing equals 24-points.

Paragraph Indents

An indent increases the distance between the side of a paragraph and the left or right margin. Indented paragraphs appear to have different margin settings. Word provides a variety of indents to emphasize paragraphs in a document.

Next page: Tabs

(Archives) Microsoft Word 2003: Paragraph Formatting Options Mac

This article is based on legacy software.

This document will help you to use paragraph formatting options to achieve the look that you want for your document.

Adjusting Paragraph Alignment

Word paragraphs can be aligned with the left or right margin, centered between the two margins, or justified. To adjust alignment, use the Paragraph dialog box, the Formatting Palette, or the keyboard. Instructions for all three methods follow.

Adjusting Paragraph Alignment: Paragraph Dialog Box Option

Select the paragraph(s) you want to adjust

From the Format menu, select Paragraph… The Paragraph dialog box appears.

Select the Indents and Spacing tab

From the Alignment pull-down list, select the desired option

Adjusting Paragraph Alignment: Formatting Palette Option

To display the Formatting Palette:

From the View menu, select Formatting Palette The Formatting Palette appears.

To adjust the alignment:

Select the paragraph(s) you want to adjust

Adjusting Paragraph Alignment: Keyboard Option

Select the paragraph(s) you want to adjust

Press the appropriate keyboard shortcut

Alignment Shortcut Left [command] + [L] Center [command] + [E] Right [command] + [R] Justify [command] + [J]

Adjusting Line Spacing

Instead of pressing extra returns at the end of each line of text, you can add space between lines by adjusting the line spacing. This is a more efficient and precise way of adding white space.

Place your insertion point in the paragraph

From the Format menu, select Paragraph… The Paragraph dialog box appears.

Select the Indents and Spacing tab

Under Spacing, from the Line spacing pull-down list, make the desired selection NOTES: Options include Single, 1.5 lines, Double, At least, Exactly, and Multiple. The At least, Exactly, and Multiple options require that you enter the amount of space between lines in the At text box.

Adjusting Paragraph Spacing

Instead of pressing extra returns, add additional space before and after paragraphs by adjusting the paragraph spacing. This can be especially useful when you do not want a blank line the same height as the text.

To display the Formatting Palette:

From the View menu, select Formatting Palette The Formatting Palette appears.

To adjust the spacing:

Select the paragraph(s) you want to adjust

From the Formatting Palette, under Alignment and Spacing, under Paragraph Spacing, in the Before and After text boxes, type or use the nudge buttons to select the desired spacing value

Working with Indents

Rather than tabbing in the first line or every line of a paragraph, you can create an indent, an amount of space between the text and the page margin. You can adjust the indent for an individual paragraph, the indent for a group of paragraphs, or the margins for the entire document. If you are setting margins for the entire document, refer to Adjusting Your Document’s Margins.

Word offers three types of indents: normal indents, first line indents, and hanging indents. A normal indent inserts a specified amount of space between the page margin and all the lines in a paragraph. A first line indent inserts space between the first line and the page margin so it looks like you used a tab. A hanging indent uses a normal indent for the first line and then moves subsequent lines farther to the right. Paragraph indents can be set using the Paragraph dialog box or the Ruler.

Working with Indents: Paragraph Dialog Box

Place your insertion point in the paragraph you want to adjust HINT: If you are adjusting more than one paragraph, select all the paragraphs you want to apply the change to.

From the Format menu, select Paragraph… The Paragraph dialog box appears.

Select the Indents and Spacing tab

Under Indentation, in the Left and Right text boxes, type the desired measurements (in inches)

If you want a different indent for the first line, from the Special pull-down list, select First line or Hanging

If you selected a first line or hanging indent, in the By text box, type the amount of space for the indent The amount of space is measured in inches.

Working with Indents: Ruler

Instead of using the Paragraph dialog box, you can make indent adjustments using the Ruler. Shown here is a graphic of the Ruler.

Tab Type

Appearance of the Ruler

Appearance of the Text

Normal Indent A Normal Indent looks like this Hanging Indent A Hanging Indent looks like this First Line Indent A First Line Indent looks like this

To set the indent:

If the Ruler is not displayed, from the View menu, select Ruler

Place your insertion point in the paragraph you want to adjust HINTS: If you are adjusting more than one paragraph, select all the paragraphs you want. For information on the different types of indents, refer to Working with Indents.

How To Style And Format Paragraphs In Word 2022

In addition to formatting text, you can also format your paragraphs in Word 2016. For example, you can set line spacing, put space between paragraphs, sent indents, and much more.

How to Format a Paragraph

3. Use a command on a selected paragraph or selected paragraphs.

As with all word processing programs, you can either left, right, center or justify your text and paragraphs. You can either do one of these things to a portion of text, such as a paragraph, or to the entire document. Take a look at the examples below.

This is an example of text that is aligned to the left.This is text that is aligned to the right.This text is centered.

The buttons or commands for aligning text are located under the Home tab in the Paragraph group, as shown below.

In the above picture, the center alignment button is highlighted. To the left of it is the left align button – and to the right, the right align button. On the other side of the right align button is the justify button.

The following text, selected from this lesson, is justified so that it is aligned between the left and right margins, adding space between letters if necessary. It gives the document a clean look.

Whenever you justify text, the text appears as a block with the text aligned to both the left and right sides of the document. Justified text is used in newspapers, because it gives a clean look to columns.

The text below isn’t justified:

Here’s what happens when we justify text:

To align text, first select it in your document.

When you change the line spacing, you change the space that appears between every line of text in a paragraph. Word adds the space below each line.

Line spacing can be measured by lines or points. The line spacing for this document is set at 1.15. This means that there is 1.15 lines between one line of text and the next. If we measured the line spacing by points, our spacing might be 12 points. Our font size is 11 points. We want the space between each line to equal the size of the text, but we also want to add a little extra spacing.

When adding space between lines, we’re going to use lines as our measure. Later in this lesson, we will use points to add space between paragraphs.

To set line spacing, select the text for which you want to change the line spacing.

Putting Space between Paragraphs

As we’ve already said, if you want to start a new paragraph, you just press the Enter key on your keyboard. But what if you want to add more space between paragraphs? Of course, you can push the Enter key more than once. Yet why bother when you can also set spacing between paragraphs.

To add space after a paragraph, use the After command as highlighted below.

Use the Before command to add space before a paragraph.

The space you add is measured in points, not lines. Points are also used to set text size, so that should help you visualize the amount of space.

You will then see the preset line spacing that you can apply to the document or a portion of the document.

Enter your values for line spacing in the At box, then choose a line spacing method, as described below:

At Least is a minimum value. However, Word can ignore this value and add more space if it’s necessary so it can make room for bigger fonts or graphics that appear on the same line as the text.

Exactly means Word doesn’t adjust spacing. It gives the exact line spacing that you specify.

Multiple is what you should use to enter line-spacing values that aren’t listed in the Line Spacing dropdown list, which we showed you earlier. If you want to set the line spacing to 4 in the At box, choose Multiple.

Indenting the First Line of a Paragraph

There are several ways you can indent paragraphs. You can indent an entire paragraph, the first line of a paragraph, or you can create a hanging indent.

When you indent the first line of a paragraph, you basically add empty spaces before the start of a paragraph, as shown below.

To create a first line indention, select your text if there is already text in the document. If you haven’t yet added text the document, you can set your indentation in the Paragraph dialogue box, and it will apply to the entire document.

The Paragraph dialogue box looks like this:

Enter an amount for the indentation in the By field. Indentions are measured in inches.

Increase the number for bigger indentions.

Creating a Hanging Indent

A hanging indent is where the first line sticks out a little to the left of the rest of the paragraph.

Go to the Paragraph dialogue box as did for a first line indention. This time, select Hanging from the dropdown menu, then set the size of your indention.

Indenting an Entire Paragraph

You can also indent an entire paragraph. Note how the second paragraph in the snapshot below is indented.

To indent an entire paragraph, first select the paragraph. Next, go to the Home tab, then the Paragraph group.

Using Tables For Organizing And Formatting In Microsoft Word

Tables of Contents and Tables of Authorities (Figures, etc.) are

What You Will Learn

not covered in this chapter (

Additional Written and Web Resources

This chapter last edited by Charles Kenyon on Friday 01 January 2021

Some less common ways to insert a table include:

Method 1: The Insert Table button (on the Insert Tab in Word 2007+; on the Table Menu in Word 97-2003)

Method 2: The Insert Table dialog

These methods are discussed further throughout the rest of this chapter. Help on each method to inserting a table into a document can be found in Help files in Word.

Method 5: Insert a Table Using on of the Quick Tables (Ribbon Version)

See the Quick Tables section below.

To insert or delete rows and columns, select what you want to affect-rows to affect rows, columns to affect columns-and then select the appropriate option from the Table menu (rows or columns).

Word 2000 and later has the ability to “nest” tables within another table. Nested tables are particularly useful when you use a table to lay out a page and then want to use a table to present other information such as quarterly earnings as a table within the table. To create a nested table:

Position the pencil in the cell where you want the nested table (or a table inside another table).

Draw the new table. To define the table boundaries, draw a rectangle.

Marking Header Row(s) – Table Rows that repeat after a page break – CK Addition Word 2003-2019

Tables often have header rows that describe what is in the columns underneath. When a table breaks across a page it is useful to have these header rows repeat. Documentation and tooltips talk about “the first” row, but multiple contiguous rows can be marked as the table header.

They do need to be the first row(s) in the table, though.

Word 2003-2019

Creating a Caption for a Table – CK Note

A “caption” is a label that appears with a Table. It can be sequentially numbered and automatically inserted with each Table if you wish.

Insertion of captions is covered in the chapter on Complex Documents.

If you need the caption to repeat you would need to put a cross-reference to it in the first row of the table and set that as a repeating table header row. That row need not have top or side borders. Multiple rows can be designated as header rows. Once you insert a caption, it can appear in a Table of Tables.

Legal Q&A on Tables

Labels in Microsoft Word

Paul notes that some tables can only be recovered using the first method.

Resize all cells in a table to be the same.

Here is a link to a different version (Jay Freedman’s) that changes the entire table rather than going cell-by-cell. If you haven’t worked with vba directly before, you may want to read:

Installing Macros by Graham Mayor.

It is far easier to manipulate tables if you are viewing the table gridlines. It is important to realize that Word uses the term “gridlines” for two very distinct features. The first is a graphics layout gridline applied to an entire page. You do not want to be using that feature for tables!

To view gridlines for tables in Word 97-2003 you would select “Show Gridlines” under the Table menu. (The toggle command is “Hide Gridlines.”)

Notice that what appear to be single, wrapped sentences in the view without the gridlines showing are really in separate cells. These would be treated by Word as being separate paragraphs as well.

Here is a short macro I developed in response to a request. (The macro recorder does not record much of table manipulation.) The measurements are in inches.

Labels in Microsoft Word are Tables, usually set up using the Labels button on the Mailings Tab (Word 2007 and later) or the Envelope and Labels wizard or the Mailmerge wizard (Word 2004 and earlier). Once the labels are set up, you can manipulate the them using any of the techniques given here for tables.

In the screenshot above, you can see the table layout with blank spacing cells that will not print on the labels. Display of gridlines is especially helpful with labels. You can also use the Table Layout tab’s tools to align text in your labels.

See Graham Mayor’s Insert logos /graphics on business cards and mailing labels for step-by-step instructions on inserting graphics on tables for labels and business cards.

See Create and Print Labels on Microsoft Support.

The Label tools create a slightly different document than you would get just adding an equivalent table to a Word document according to MVP Jay Freedman. “For one thing, it overrides the minimum margin settings that come from the printer driver and it ignores the usual header and footer heights.”

Any text in the chúng tôi template including headers or footers will interfere with proper creation of labels.

See also: Troubleshooting

See also: Table Causes Document File Size to Increase (Word 2000 +)

Tables can become corrupted.

Ideas (from Paul Edstein) to fix a corrupted table:

Part of the text is hidden inside a table cell…

Can I insert an Excel worksheet into Word?

Menu Versions Word 2000-2004

Ribbon Versions – Office 2007 and later

In the top box labeled “Formula” you’ll see an equal sign. Type the word “SUM”, then an open parenthesis “(” and choose “Table1Total” from the Paste Bookmark drop-down list.

Type a comma after “Table1Total” then go to the Paste Bookmark drop-down list and choose “Table2Total”.

Type a close parenthesis after “Table2Total” in the Formula box. Your formula should look like this:

=SUM(Table1Total,Table2Total)

I never could understand sorting in Word tables. Is it possible to sort dates and numbers as well as text?

Practice: Sorting Dates in Tables

In a table, enter an array of dates that are near each other but have varying formats, like the following:

How can I make a pleading caption in Word?

There are a couple of different methods you can use to create a pleading caption in Word, but tables are one of the best ways to do this.

Practice: Make a “Scalloped” Caption Using Tables

Perform steps 1 through 5 in the “Insert a Table with Draw Table tool” in the preceding exercise.

If you have a lengthy caption (you’ve probably seen some that go on for pages), you may have noticed that the scallops don’t automatically copy down the center column of the table. If you don’t find this acceptable, consider another way to make a caption where you use a border line separating the parties from the pleading title. Many courts now accept captions prepared this way-check your court rules to see if you can use this type of caption.

See also the example pleading caption (above) using Tables.

Practice: Make a “Bordered” Caption Using Tables

In a blank document, create a table with two columns and only one row.

Fix the bottom left border as described in step 2 in the “Make a “Scalloped” Caption Using Tables” example that preceded this exercise. While you’re in the Borders and Shading dialog, turn on the printing border for the right side of the leftmost cell as well.

In this type of caption, the border automatically extends as you add cross-complainants or type a long pleading title.

How can I get the first row to repeat at the top of each page throughout the table?

In lengthy tables such as file or pleading indices, holdings lists, and other legal documents, if a table spills onto subsequent pages you can make headings repeat at the top of each new page that contains a part of the table.

Practice: Create Table Headings

In a blank document, from the Table menu, choose Insert Table (Insert, then Table in Word 2000).

Create a table with two columns and 250 rows.

In the first cell of the first column, type Attorney.

In the second cell of the first column, type Extension.

Select the first row of your table, and then from the Table menu, choose Headings (it’s called Heading Rows Repeat in Word 2000).

Go to Print Preview and view your handiwork.

Word also allows you to have more than one row repeat at the top of the page. Just select the rows that you want to repeat and perform step 5 above.

How to have the word “Continued” in the header row of multipage tables on continuation pages but not on the first page. (CK Note)

Put the word “continued” in the heading line on the first page. Then create a textbox or autoshape anchored outside the heading row and use it to cover the word. The shape or text box should have no border and white fill. This way, the word continued will not appear on the first page but will appear when the row (without the textbox or shape) is repeated on subsquent pages.

An alternative strategy would be to put the word continued in the original row anchor an occluding shape in a non-header row to block the word on the continuation pages.

Both methods are less than ideal, both work. Here is an example of using a textbox anchored in the table but outside the header row.

The Text Box is shown as semi-transparent for this demonstration it would be opaque in use. It can be anchored anywhere outside the header row, including outside the table itself.

Note that any manipulation of the textbox is likely to move the anchor into the first row. You need to have the anchors displayed and correct for this by moving the anchor.

Here is what the continuation page looks like:

A variation of putting an occluding shape (or frame) in the page Header is used when a page number is needed in the table itself. This takes more fiddling than having the occluding box on the first page because alignment is tricky.

A page number in a Header Row will repeat the number from the first page. A page number field in a shape or TextBox in a Header/Footer will reflect the pagination used by Word in headers and footers.

Here is what the continuation header (Section set to have a different-first-page header) looks like from the edit Header screen.

The screenshot below is from the Print Preview screen. (In print view, the Page 2 would appear faded because it is part of the page header; in draft or normal view, it would not appear at all.

It’s possible to have it either way in Word-you can have your cells break over a page or not, depending on your preferences for the job at hand. By default, the text in a table breaks across a soft page break in both Word 97 and Word 2000. Let’s explore the options in the following exercise.

Practice: Prevent Cells from Breaking Over a Soft Page Break

In a blank document, from the Table menu, choose Insert Table (Insert, then Table in Word 2000).

Create a table with 2 columns and 250 rows.

Make sure you’re in Page Layout view (Print Layout view in Word 2000).

Go to the bottom of the first page and type in one of the cells until you see text both above and below the Soft Page Break.

Make sure your cursor is anywhere in the table, and then from the Table menu, choose Cell Height and Width (Table Properties in Word 2000).

In the Cell Height and Width dialog box, find the check box Allow row to break across pages.

If the option is checked, the text can break over a page. If not, the row that contains the cell that broke over a page is moved to the next page in its entirety.

This does not prevent cells from breaking over hard page breaks. Also, if you have more than a page of text in a cell, a soft page break must exist somewhere in that text, and the text breaks over a page even though you’ve cleared the checkbox in step 6.

Is there an easy way to make a file index in Word? I had a macro in WordPerfect and now I’ve got to make them from scratch.

The bad news is that you do have to make it all over again; the good news is that you’ll only have to create it once. Using the power of tables together with AutoText, you’ll be able to make a killer file index that you can use repeatedly.

Practice: Create a File Index Using Tables

Open a blank document, and from the Table menu, choose Insert Table (Insert, then Table in Word 2000).

Create a table with as many columns as you need (we’ll use 4 in this example) and 2 rows.

In the first cell of the first column, type “Number”.

In the first cell of the second column, type “Document Name”.

In the first cell of the third column, type “Date Filed”.

In the first cell of the fourth column type “Description”.

This will give you a numbered column down the left side.

My table column resizes as I type…

I am doing very simple math in my Word table. Is it possible to create subtotals?

Practice: Work with Subtotals in a Word Document

In a blank document, create three separate tables with values in the first two cells of the first two tables.

Select the first sum field (it should say “1500” if you’ve used the example above), making sure not to select the end-of-cell marker after it (it kind of looks like a spider).

After selecting the first sum field in step 3, go to the Insert menu and choose Bookmark. For keyboard users, CTRL+SHIFT+F5 gets you to the Bookmark dialog box.

Repeat steps 3-5 for the second total (“450” if you’re following the example above), calling it “Table2Total”.

Creating a Table of Tables (or Figures or Equations)

Often a table of the tables in a document is desired (similar to a Table of Contents). This can be done relatively easily in Word. Insertion of such tables in covered in the chapter on Complex Documents.

It is possible to have a table act like a graphic and have text wrap around it. This is done through the Table Properties and the Positioning Button. Here are two screenshots showing the controls in Word 2003 and Word 2010. (Controls are identical.) The Word 2010 screen shot shows positioning relative to the bottom page margin.

The default settings are for no text wrapping and the Table is simply inserted at the insertion point in the document. The Word 2003 screen shot has the default settings for the Table Positioning dialog. The table positioning button is not active on the Table Properties unless the text wrapping is set for “Around.”

I am unsure when this floating table ability was added to Word but suspect it came with Word 2002. It is not available in Word 97.

Note that repeating headers in tables do not work if the table is floating rather than in the document layer.

Here are some screenshots of floating tables set for text wrapping. They essentially act much like graphics in this mode.

One table set for wrapping with the tool to move it displayed (red circle)

Two tables, both set to wrap.

The same two tables with wrapping set, one nested inside the other.

Converting Tables to Text and Text to Tables

It is relatively easy to convert a table to a similar formal structure without a table.

In Word 2007 and later, the command for this is found on the right side of the Table Tools Layout tab.

In earlier (menu versions) of Word the commands are found under the Tables menu.

To convert a table to text, there must be a table and the insertion point must be inside the table. Using the choice will give a dialog box

The default choice is tabs which gives a traditional tabbed table rather than an Word table. It is certainly appropriate for many tables. If a table cell has text that would extend beyond the tab area, you can have something unworkable, or at least requiring more work.

Here is a brief table:

Converted to text using the Tabs setting it does not line up. Tabs settings for those paragraphs would need to be adjusted.

That was done in the following screenshot. However, in many tables this would not be practical and one of the other dividers would be needed.

Conversely, it is possible to convert text to a table. To do this, you need to select the text you want to convert.

This dialog lets you adjust the number of columns, but not rows. It lets you modify column width and pick the text separators. Note that you do not have to have everything precisely laid out for this to work.

In the following screenshot, a single word in a sentence is selected.

So long as you are not changing the number of columns, you get the same result as you would if you, instead, just inserted a table. The selected word(s) are inserted into a single column table and preceding and following words become their own paragraphs.

So long as the marker to separate text is not found in the selected text, it does not matter which marker is chosen.

Examples of Use of Tables

These are ad-hoc examples.

Fax Transmittal Coversheet Word 97 – still available as Fax (elegant)

(There is more about how the prompts and checkboxes in this work under MacroButton Fields.)

Pleading Caption Using Tables

These tables were set up originally using Word 97 with splitting and merging cells. Gridlines are shown but do not print. The formatting of individual cells is done using styles. (The names, addresses, and other case-specific details are inserted using Mail Merge.)

Using Tab Settings and Tabs Inside Tables

Word allows you to set your own tab stops and use different kinds of tabs. However, you have to use Ctrl+Tab to generate a tab inside a table; the Tab key, by itself, will simply move you to the next cell.

decimal tabs behave a bit differently inside tables than they do outside a table. If you have a decimal tab set and no other tab settings, your text will immediately align to that tab, without an actual tab character being inserted using Ctrl+Tab.

Use of a decimal tab is illustrated below. Note the Ruler at the top of each screenshot.

Table cell with no tabs set

Table cell with left tab set looks the same

Table cell with decimal tab set uses tab to align number to decimal

Add a “dot leader” using the tab setting dialog

And finally, what would happen without the left tab having been set first!

Reminders:

Select the row(s) at the top of the table that you want to repeat.

Pick Table Properties from the context menu

Check the box to “Repeat as header row at the top of each page”

Note this may work in earlier versions than 2003 but does not work in Word 97. I believe this feature was introduced with Word 2000 but do not know for sure.

Word 2007-2019 (Ribbon versions) can also use the ribbons

Select the Row(s) you want to repeat across page breaks.

On the right end of the Table Tools Layout Tab check the option to “Repeat Header Rows.”

Two variations on the Ribbon command to Repeat Header Rows

Note, that there is on the Design Tab also a checkbox for header row. This is a design choice for picking a table style and has nothing to do with repeating on the next page.

Final note, header rows do not work if you have a table set to have text wrap around it.

Using Cell Properties to Change the Appearance of Text in a Cell (Wrapping and Fit Text Options)

It is easy to miss these Options which have been available at least since Word 2003.

Wrap Text is checked by default and Fit text is unchecked by default.

The table shown below has the top two cells set to fit text. The font typeface and size is the same in all three cells.

The text in the top cell appears compressed. It is the same text as the first three sentences in the bottom cell.

Use Word’s Quick Tables and Add Your Own (Ribbon Versions of Word – CK Section)

Word 2013-2019/365 lets you insert rows and columns using your mouse

Word 2013 added another on-screen control to allow insertion of rows or columns. It is a plus sign in a circle at the beginning of a row or top of a column.

The Tools for Working with Tables – Toolbars and Ribbon Tabs

You can manipulate tables using tools on the Tables and Borders Toolbar (Word 97-2003) or on the Table Tools Tab Ribbons (Word 2007-2019)

Tables and Borders Toolbar (long form above, compacted below)

Table Tools Design Ribbon (above) and Table Tools Layout Ribbon (below) – Word 2007 and later

These Table ribbons are context ribbons. They become visible and active when you are in a table and are hidden when you are not.

You can use any of the tools you normally would use to format text in tables. See Basic Formatting. Probably the best method, though, is to use Styles.

Text in selected cells can be aligned in any of nine directions using the alignment buttons on the Tables and Borders Toolbar or the Alignment group of the Table Layout Ribbon. This is a form of direct formatting.

Your author does not know much about Table Styles and they were introduced after the original chapter on Tables was written. You can see them in the Design Ribbon above; here is a screenshot from the Word 2010 Table Style Gallery.

You can get many of these same built-in styles using the Table AutoFormat command in Word 97-2003 (on the Tables menu).

Using either of these can allow you to make dramatic changes for better or worse to your table’s appearance. Remember, UnDo is your friend!

See Why I Don’t Use Custom Table Styles by Shauna Kelly

There are a number of operations you can do to selected parts of a table but first you have to select those parts!

In Word 2007 and later, on the far left side of the Table Layout Tab there is a Select button you can use to select the Table, a Cell, a Row, or a Column.

In Word 97-2003 there are Select commands under the Table Menu that allow this.

Once you have portions of a Table selected, you can apply formatting, copy, paste, and perform other operations on that portion. One of the key things you can do is to mark one or more rows as a “Header Row” for the table. This is something completely different from Headers and Footers for pages.

Keyboard Shortcuts – with selection point (cursor) in table

Alt+5 (on the numeric keypad) Selects the entire table.

Move the selection to the top or bottom of a row and use the following to select the column:

Shift+Alt+PgDn to select entire column from the top cell.

Shift+Alt+PgUp to select entire column from the bottom cell.

Using the Backspace and Delete Keys to Modify Tables

The Backspace and Delete keys act on selected text to delete the preceding character (Backspace) or delete the following character (Delete). When text is selected, both will delete the selected text.

However, in a Table when the table or cells are selected (rather than just text), they act differently.

When you have a table, rows, columns, or cells selected, the Delete key will empty whatever you have selected, leaving the table structure intact.

The backspace key will delete the structure as well.

Method 4: Import Data from Another Application

If you have already created data in a tabular format in another application, there is a good chance that all you need to do to create a table with that data in Word is copy and paste.

Practice: Create a Table from Another Application

Make sure Word is open. Open the file in the other application that contains your tabular data.

Select (if necessary) and copy the data from the source file.

Switch to Word.

Choose Paste from the Edit menu.

While these three methods are the most common for creating a table in Word, other methods are also available. They include:

Method 3: Draw a Table

Practice: Insert a Table with the Draw Table tool

The Insert Table button is limited in how many cells it can display initially. When building a large or more complex table, you may find using the Table menu more useful. In Word 97, from the Table menu, choose Insert Table; in Word 2000-2003, from the Table menu, choose Insert, and then select Table. The Word 2000-2003 Insert Table dialog box is shown in the next figure.

The Insert Table dialog box in both Word 97 and Word 2000 allows up to 63 columns and 32,767 rows in a table, but Word 2000 lets you exercise more formatting choices and allows you to set defaults for subsequent visits to the dialog box.

Practice: Insert a Table with the Insert Table dialog

Make sure you’re on a blank line in your document.

In Word 97, from the Table menu choose Insert Table. In Word 2000, from the Table menu choose Insert, then select Table.

In the Number of columns box, type 100.

In the Number of columns box, type 4.

In the Number of rows box, type 100.

If you need more than 63 columns or 32767 rows, consider using Microsoft Excel or Access, depending on the task.

Tables Overview

Everything from pleading captions to file indices to stock certificate listings can be managed in tables. In this chapter, we cover the basics first-how to create, modify, and prepare your tables for the legal environment. Next we’ll look at some of the ways to make tables useful in your firm. You will also see a greater number of references to Word 2000 than in other chapters. This is because the Table feature in Word 2000 has been greatly enhanced to offer more functionality. The enhancements continued through Word 2019. You may prefer Table Basics (Ribbon) by Suzanne S. Barhill, MVP.

You can use tables to align numbers in columns, and then sort and perform calculations on them. You can also use tables to create interesting page layouts and arrange text and graphics.

“Like a hammer, the time-proven spacebar has been used countless times to perform chores for which it was never intended. Yes, a hammer can compel a screw to join two pieces of wood together, and a spacebar can be used to move text around so it looks like a table. However, just as a hammered screw makes for a shaky wooden table, a word processing table fashioned together with spaces is equally fragile. Add something to the table and it doesn’t hold together. Which table? Take your pick.” Microsoft Word 2010 Bible by Herb Tyson

There are many ways to create tables in Word. Some of the more commonly used methods include:

Word for Law Firms and Lawyers CK Note)

After completing this lesson, you will be able to:

CK Note: WARNING:

Using nested tables will make your document incompatible with Word 97. A nested table is a table within a table. You can follow the directions given above pretty much in Word 97 and create a good result. That is, you can use the pencil to draw new cells within an existing cell. What you can’t do in Word 97 is create that second table outside of the first one and then copy or move it into the first table.

You can download samples of a nested table and a pseudo-nested table if you want to look at this more closely. One document is compatible with Word 97, the nested table sample can’t be properly opened in Word 97. (It will open, it is just that the table will be scrambled.)

Download Page

Note

In Word 97, rows are inserted above the selected row(s), and columns to the left of a selected column(s). In Word 2000, you can define whether rows are inserted above or below the current row, and whether columns are inserted to the left or right of the current column.

The ribbon versions of Word added a gallery of sample tables called Quick Tables. These are Building Blocks.

Word 2007 and later come with nine built-in sample “quick” tables. Again, these are building blocks and come in the file Built-In Building chúng tôi in Word 2010 and later (Building chúng tôi in Word 2007).

Unlike table styles, these are actual tables. The user can add their own table to the Table or Custom Table Quick Parts Gallery and have them show up in this menu.

At the bottom of the Quick Tables dropdown you can see the command ” Save Selection to Quick Tables Gallery. That command is active only if a table is currently selected when this drop-down is used.

You can reach the same Create New Building Block dialog by using the keyboard shortcut of Alt+F3. *

The Create New Building Block dialog gives you the opportunity to choose:

The name for your Quick Table. The tables will be listed in alphabetical order, within the category.

The Gallery to store it in. If you want it to show up under Quick Tables, you must save it in the Tables Gallery.

The Category. The tables appear in alphabetical order in their categories which also appear in alphabetical order. The default category is “General,” which will appear after “Built-In” in the list. The category shown above is “_My Quick Tables” which would appear before either.

The “Save in” Template to store the Quick Table. The dialog above shows Building Blocks,dotx which is the default. I recommend saving it in a different template if you want to share your quick table. See Where can Building Blocks be stored?

* If you use the keyboard shortcut of Alt+F3 to reach the “Create New Building Block” dialog, the default gallery will be AutoText and the default save-in location will be the normal template.

Sub ChangeCells() ' Resizes all cells in active document to one size (in inches) Dim oTable As Table, oCell As Cell For Each oTable In ActiveDocument.Tables For Each oCell In oTable.Range.Cells oCell.Width = InchesToPoints(2.3) oCell.Height = InchesToPoints(1.5) Next oCell Next oTable End Sub

This chapter from original Legal Users Guide to Microsoft Word 2002 – document in zip format

Original Chapter on Microsoft Website

views since 13 April 2004

Copyright 2000, Microsoft Corporation. Copyright 2000-2002, 2004-2006, 2010-2021 Charles Kyle Kenyon See information about copy permission.

Search Intermediate Users Guide to Microsoft Word Using Google My office page as a Madison, Wisconsin Criminal Defense Lawyer.

Original Legal Users Guide to Microsoft Word 2002 – Documents in Zip Format

A note about link exchanges. This site does not participate in link exchanges to build web presence. If you have a link that you think would be of use to people reading this page, please send it to the webmaster with the url of the page where you think it should appear and it will be considered. Your placing a link to this site will not affect the decision on whether to add your link, though.

Cập nhật thông tin chi tiết về Formatting Paragraphs In Microsoft Word trên website Hoisinhvienqnam.edu.vn. Hy vọng nội dung bài viết sẽ đáp ứng được nhu cầu của bạn, chúng tôi sẽ thường xuyên cập nhật mới nội dung để bạn nhận được thông tin nhanh chóng và chính xác nhất. Chúc bạn một ngày tốt lành!